Maulden Coatings

Mobile polyurea coatings and spray foam insulation, based in Dahinda, Illinois.

Gary Maulden sprays ArmorThane coatings from a rig that drives to your roof, bin, tank or building.

Applicator in a white suit spraying foam insulation between wall studs
Finished white polyurea coating on the roof of an RV inside a shop

Protect

Steel rusts, wood rots and concrete wears down. A sprayed polyurea skin takes the abuse so what is underneath does not.

Two applicators on a lift spraying a gray coating onto a tall steel wall

Seal

Water finds seams. Polyurea goes on as a liquid and cures as one piece, so there are no seams to find.

Gloved hand holding a spray gun, laying blue polyurea across a wall and floor joint

Insulate

Spray foam insulates and air seals in the same pass. It sticks where it lands and fills the gaps batts leave behind.

Spray foam covering the underside of an attic roof deck and its rafters

Extend

A roof that is worn but still sound does not always need tearing off. A coating can put years back on it.

Metal tile roof half coated, fresh gray coating over the faded red finish
Applicator in a white protective suit and respirator carrying a spray gun and heated hose

The shop is on wheels.

A roof, a grain bin or a tank farm cannot be hauled to a spray booth. So ArmorThane built Gary a rig that carries the proportioner, heated hoses and material to wherever the work is standing.

  • Polyurea and spray foam from the same trailer
  • Farm, commercial and residential jobs
  • Sprayed in place, with no tear-out and no hauling
See how the rig works

And plenty more.

If it is steel, concrete, wood or foam and it holds still, there is a good chance it can be coated. Pick one to ask about it.

See every service

How a job runs

  1. Send it over

    Photos, rough sizes and the location.

  2. Get a straight answer

    What we would spray and the price. If coating is the wrong fix, we say so.

  3. Prep, then spray

    The surface is cleaned, masked and sprayed.

  4. Back in use

    Polyurea sets in seconds. Many jobs go back into service the same day.